886-4-25684041
886-4-25670324
No.128, Longshan 1st St., Daya Dist., Taichung City 428, Taiwan
http://www.turret.com.twProducts
Powered Turret Features:
Turret rotation and indexing is driven by a special servo motor.
Tool holders are driven by a spindle motor that features high torque output and no noise.
Fast tool change without change error.
Powered tool holders meet DIN69880 and DIN5480 standards.
Repeatability accuracy reaches 0.003 mm.
Three-piece type curvic clutch ensures high positioning accuracy.
VDI Ø20, 12 tools, tools center Dia. Ø240 mm, Turret center height 63 mm
SERVO TURRET:
Mitsubishi Servomotor: HG-KR43JK ; Gear ratio 1/48
Hydraulic power source: P = 30 kg / cm²
Hydraulic cylinder clamping force 1,640 kg
POWERED TOOL HOLDER:
Tool shank specifications: DIN5480 W11 x 0.8 and zero detent system
Max. tool speed: 5,000 rpm.
Spindle motor specification:
Mitsubishi SJ-PF2.2-01 1.5 / 2.2 KW
Fanuc α1.5 1.1 / 2.2 KW
Tool and motor transmission gear ratio 1 : 1
Specifications And Accessories
| MODEL | LS-120SP | |
| Center height | mm | 63 |
| Number of tools | N | 8T / 12T |
| Rotating time (tool-to-tool) | sec | 0.42 / 0.4 |
| Rotating time (including locking) | sec | 0.52 / 0.5 |
| Total indexing time for 180° | sec | 0.83 |
| Total indexing time for 180° (including locking) | sec | 0.93 |
| Gear speed ratio | 48:1 | |
| Curvic couplings type | 3 Piece type | |
| Turret servo motor | HG-KR43JK MR-J4-40A-RJ |
|
| Hydraulic working pressure | Kgf/cm² | (25-30)30 |
| Flow rate | L/min. | 20 |
| Thrusting force of hyd. cyl. | Kgf | 1,640 |
| Accuracy of repeatability | mm | 0.003 |
| N.W (Without spindle motor) | Kg | 135 |
| Tool servo motor | MITSUBISHI - SJ-PF2.2-01 FANUC - α1.5 |
