Semi-automatic-High Precision Surface Grinder-EQUIPTOP HITECH CORP.-EZB2B taiwan machine tools ＆ autoparts ＆ plastic mold die

1YRS

EQUIPTOP HITECH CORP.

886-4-25576060

886-4-25569677

No.88, Sanfeng E. Rd., Houli Dist., Taichung City 421, Taiwan

www.ffg-equiptop.com

Products

High Precision Surface Grinder

Semi-automatic

ESG-3A1228

GENERAL FEATURES：

1.Column:

Enlarged, honeycomb-ribbed column especially suitable for heavy duty grinding.

2.Construction:

Construction of table, saddle and base is casted with high grade iron, strongly ribbed.

3.Spindle:

Enlarged spindle set is supported by four preloaded precision angular contact Ball bearings for heavy duty.

4.Slideways:

Vertical, cross (double vess) and longitudinal (one vee &one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy.

5.Automatic Continuous Lubrication System:

All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws.

6.Cross Feed:

Ball screw for cross travel, powered by AC motor.

7.Hydraulic Table:

Table speed ranges 5-25m/min. With rack and pinion table drive for hand operation.

8.Proximity Switch:

Provide built-in-type (hidden) proximity switch, features safe and easy operation.

9.Table Speed Control:

Presettable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time.

10.Hand Wheels:

Zero-setting slip-ring with vernier on vertical handwheel, and vernier on crossfeed handwheel.

Specification

SPECIFICATIONS：

1A: Longitudinal Hydraulic.

2A: Longitudinal Hydraulic And Crossfeed Motorized.

3A: Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized.

ASD: Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down.

MODEL		ESG-3A1228
Table Size		305x712mm(12x28")
Max.grinding length	Longitudinal	712mm(28")
Max.grinding width	Crosswise	330mm(13")
Max. distance from table surface to spindle centerline		Standard column:630mm(24 3/4"); Optional high column:720mm(28 5/16")
Stadard magnetic chuck size		300x700mm(11 3/4x27 1/2")
Longitudinal movement of table	Max. travel, hydraulic	760mm(30")
	Max. travel, manual	830mm(32 9/16")
	Max. travel,infinitely variable	60HZ,5-25m/min,50HZ,5-20m/min
Cross transverse travel	Auto transverse increment	1~25mm(0.04"-1")
	Max. auto transverse travel	350mm(13 3/4")
	Max. manual transverse travel	380mm(15")
	Handwheel per revolution	5mm(0.2")
	Handwheel per graduation	0.02mm(0.001")
Sheelhead vertical infeed	Automatic infeed	0.001-0.04mm(0.00005-0.002")
	Step feed (jog)	0.001mm(0.00005")
	Rapid travel, Approx	150mm/min
	Slow travel, Approx	6mm/min
	Handwheel revolution	1mm(0.05")
	Handwheel graduation	0.005mm(0.0005")
Grinding spidle drive	Speed	60HZ,1750 R.P.M.; / 50HZ,1450 R.P.M.
Grinding spidle drive	Power rating	Standard:5HP; Optional:7 1/2HP,10HP
Standard grinding wheel	Diameter	355mm(14")
	Width	50mm(2")
	Bore	127mm(5")
Hydraulic motor	Power rating	3.0HPx6P
Crossfeed motor	Power rating	80Wx6P
Elevating motor	Power rating	1/4HPx6P
Floor space	Total space required	2950x1970x2050mm(116x78x81")
Weights	Net weight, Approx.	3020KGS(6644LBS)
Weights	Gross weight, Approx.	3520KGS(7744LBS)
Rated power, Approx		8 1/2HP(Spindle motor:5HP) 11HP(Spindle motor:7.5HP), 13 1/2HP(Spindle motor:10HP)
Packing dimensions	L x W x H	2500x2290x2200mm(99x90x88")

NOTE:
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.

Enlarged Spindle Set For 1020, 1224 Series

Ballscrew For Crossfeed Movement

Table Speed Control For 1020, 1224 Series